291 GR II

Sonal Industries - +91-9426408439 - sonalind2003@gmail.com

DESCRIPTION

IS 291 Gr II Naval Brass is mostly used for machine hardware, screw machine products and valve stems, IS 291 Gr ll Naval Brass is great for hot forging, pressing and machining. With high ductility, naval brass has excellent electrical and thermal conductivity. IS 291 Gr II naval brass has good creep resistance and high impact strength.

CHEMICAL COMPOSITION

Elements Min (%) Max (%)
Cu 59.00 62.00
Pb 0.50 1.00
Sn 0.50 1.00
Fe - 0.10
Total - 0.20
Zn Remainder

Mechanical Properties According To IS 291 GR II (As Per Temper HB)

Range (Inch) From To UTS Min (MPa) PS Min (MPa) Elongation Min (%) Hardness Min (HRB) Hardness Max (HRB)
Round (Dia) 1.5 75 390 - 15 - -
Hex (A/F) 3 65 390 - 15 - -
Square (A/F) 3 60 390 - 15 - -
Rectangle (Thickness) 3 50 390 - 15 - -
PHYSICAL PROPERTIES
Melting Point - Liquidus°F 1650
Melting Point - Solidus°F 1630
Density lb/cu in. at 68°F 0.305
Specific Gravity 8.44
Electrical Conductivity % IACS at 68°F 26
Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F 67
Coefficient of Thermal Expansion 68-57210⁻⁶ per °F (68 – 572°F) 11.8
Specific Heat Capacity Btu/ lb /°F at 68°F 0.09
Modulus of Elasticity in Tension ksi 15000
Modulus of Rigidity ksi 5600
FABRICATION PROPERTIES
Technique Suitability
Soldering Excellent
Brazing Good
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Not Recommended
Coated Metal Arc Welding Not Recommended
Spot Weld Not Recommended
Seam Weld Not Recommended
Butt Weld Fair
Capacity for Being Cold Worked Poor
Capacity for Being Hot Formed Good
Forgeability Rating 90
Machinability Rating 70

TYPICAL USES

  • Fasteners
  • Industrial
  • Marine